Technique
From a design perspective, the Accordo Essence is a three-way bass-reflex speaker system. The tweeter is a 29-mm silk dome unit designed by the late Ragnar Lian, co-founder of the renowned Scanspeak, a leading Swedish company that has always supplied the drivers for Franco Serblin’s creations. This particular tweeter is the culmination of three decades of relentless development work. The mid-woofer is a 15-cm-diameter driver manufactured by Scanspeak to the Italian company’s specifications, featuring a cone with a polymer microsphere surface treatment and radial ribs to control its resonances. At the center is a phase plug designed to control dispersion at higher frequencies. The driver handling the lowest end of the reproduced frequency range has a diameter of 18 cm, with characteristics similar to those of the midrange driver in terms of cone material, but without the phase plug, which is replaced by an aluminum cap.
As for the crossover, the manufacturer remains somewhat tight-lipped about both the type of crossover and the crossover points between the various drivers. The technical specifications list a sensitivity of 88 dB/W/m and a nominal impedance of 4 ohms, which suggests that this could be a demanding load for the amplifier tasked with driving them. The stated frequency response ranges from 35 Hz to 22 kHz in a listening environment.

The cabinet is crafted entirely by hand in Italy using wood personally selected by the craftsman, who also oversees the drying process to ensure that the moisture content of the wood, at the time of processing, falls within a narrow range of values. This procedure, which the manufacturer adheres to strictly, takes several years to complete and, as one might imagine, has significant implications for the production process. As can be seen from the images, certain aluminum and magnesium components are strategically positioned to control the resonances of the solid walnut elements. One such component runs the entire vertical length of the back panel, and two others are located near the lower and upper closure elements. The system of spikes The metal bracket on the Serblin Accordo Essence is adjustable and allows for a slight tilt in the vertical plane.
There are two available finishes: natural solid walnut with chrome accents and graphite gray with a semi-matte finish, also featuring chrome accents.

Positioning and Interfacing
The presence of tuning ports on the rear panel of the cabinet suggests maintaining a certain distance from the back wall during installation; in fact, the instruction manual is quite clear on this point, recommending a minimum distance of one meter. In the specific case of our listening room, which was acoustically treated by Astri Audio, we strictly followed the recommended guidelines regarding the distance from the side walls, while for the back wall we settled on eighty centimeters. It was very interesting to observe just how sensitive the Accordo Essence speakers are to the parameter of toe-in, which is the angle at which the on-axis sound from the speakers is more or less directed toward the listening position. The manual suggests orienting the speakers toward the listening position; however, by making minute adjustments of just a few degrees at a time, we were able to achieve not only an extremely wide soundstage across all three axes—to the point where the speakers “disappeared”—but also focus of the highest order.

The issue of pairing with an amplifier is equally interesting. The technical specifications state that the minimum power requirement is 20 W per channel, though that seems a bit optimistic to me. Not because the Serblin Accordo Essence can’t produce sound at those power levels—far from it. Personally—and I’m backed up on this by my friend and business partner Giancarlo Valletta—I got the impression that these speakers thrive when driven by an amplifier that’s not only of the highest quality but also capable of delivering massive amounts of current. We decided to pair them with the Boulder triptych consisting of the 812 preamplifier and the 851 mono power amplifiers 200W into the Accordo Essence’s rated impedance. Later on, I’ll discuss this pairing in more detail from the perspective of my listening impressions. I’d like to mention, however, that during the test we replaced that amplifier with the Audio Analogue Absolute 3.0 integrated amplifier, which is rated at a whopping 300W into 8 ohms—a figure that doubles at 4 ohms. Well, let’s just say that the stars of our test really appreciated the burst of energy provided by the powerful Italian amplifier.


GIPHY App Key not set. Please check settings